-
References Of ASTM&ASME STANDARDS
ASTM&ASME STANDARDS |
-
Titanium Damascus-Lead The Fashion Trend
Titanium Damascus is a new type of metal material. It is made of two or more titanium alloys. Then through heat treatment (titanium bluing) or anodization, different color layered titanium alloy materials are formed. Titanium Damascus, referred to as Timascus or mokuti. Titanium Damascus is a product of modern technology. It was first produced in 2001. In fact, Titanium Damascus…
-
The high-strength and tough titanium alloy pipes developed by Baoti successfully passed the ultra-deep well drilling test
Recently, drill pipes made of Baoti Co., Ltd.’s high-strength and tough titanium alloy pipes successfully completed an 8,000-meter ultra-deep well drilling test in Tarim Oilfield, Xinjiang. Compared with steel drill pipe, titanium alloy drill pipe has a higher specific strength, and the same equipment can be used for drilling operations in deeper wells; it can reduce torque, further increase drilling…
-
What is PVD Coating?
PVD coating is a technique in which a solid material is converted into its vapour phase to coat another material. The process turns the solid material (called the target or sputtering target) into vapor. It then condenses to cover the other material known as the work-piece. PVD coating has many processes. Each process has a unique procedure for coating the…
-
Pure tungsten
Tungsten has a high melting point, low vapor pressure, and low evaporation rate. The chemical properties of tungsten are very stable
-
Titanium and Titanium Alloys
Titanium metal is abundant in the earth’s crust and is extracted commercially from the ore minerals rutile (titanium dioxide) and ilmenite (iron-titanium oxide). Titanium offers properties high strength, stiffness, toughness, low density, and good corrosion resistance. These properties are enabled by a wide variety of titanium alloys ranging from applications at very low to elevated temperatures. This enables weight savings…
-
Parameters of Pure Tantalum
Melted tantalum is usually more economical to produce than sintered tantalum and provides sufficient quality for many applications.
-
What you may know about porous sintered titanium materials
General Introduction Sintered titanium sheet or any other shapes like bars, rods, and tubes, also known as porous sintered material, is made of spherical or irregularly shaped metal or alloy powder by forming and sintering. The internal pores of the material are crisscrossed and interconnected, generally with 15% – 60% volume porosity, and a pore size of 1 – 100…
-
Titanium Specifications For Aerospace and Military
Aerospace Titanium | Military Titanium Aerospace Titanium Specifications (AMS 49) AMS 4900 Plate, Sheet & Strip – Annealed –55,000 psi Yield AMS 4901 Sheet, Strip & Plate – Annealed – 70,000 psi Yield AMS 4902 Plate, Sheet & Strip – Annealed – 40,000 psi Yield AMS 4905 Plate, Damage Tolerant Grade – 6AI 4V, Beta Annealed AMS 4907 Plate, Sheet & Strip…
-
Titanium Grade 7
Titanium Grade 7 has physical and mechanical properties equivalent to CP3 titanium or Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion especially from reducing acids. We stock and sell Titanium Grade 7 in bar, forgings, plate, sheet, tubing, welding wire & wire. Chemical Analysis of Titanium Grade 7 C N O H Pd Ti…
-
Duplex Stainless Steels
Duplex stainless steels have a combination of two phases, ferrite, and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steel, leading to increased strength, improved weldability, higher toughness, and resistance to several types of corrosion. Commercially, they are also cheaper than austenitic stainless steels due to their lower nickel…
-
What is pitting corrosion and how does it happen?
Pitting corrosion is in itself a corrosion mechanism, but is also a form of corrosion often associated with other types of corrosion mechanisms.
